- ページ 4

電気ヒーター Dimplex XLS12NのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Dimplex XLS12N 8 ページ。 Ultra-slim storage heaters
Dimplex XLS12N にも：取扱説明書 (10 ページ), 操作説明 (4 ページ), 操作説明 (4 ページ), 取付説明書 (8 ページ), 取付説明書 (8 ページ)

ページを印刷する

11. Solid Brick/High Density Block Walls. (See step 12

if walls are low density block.) These must be drilled

and plugged with the No. 10 size plastic inserts provided.

The correct size of drill (8mm) should be used and the

hole should be drilled to a depth of 15mm greater that the

length of the plastic insert so that the ﬁ xing is made below

the plaster layer.

12. Low Density Block Walls. A specialised ﬁ xing, such

as the Uniﬁ x LB70, should be employed following closely

the manufacturer's instructions.

Panelled Internal Walls. Here it is best to locate the

studding and use No. 10 size woodscrews. Where it is

not possible to locate the studding use type M5 Rawlplug

INTERSETS on securely fastened plasterboard panelling.

For other wall panel materials the wall panel manufacturer

should be consulted for details of suitable wall ﬁ xing

devices.

13. If left hand cable connection is required, the mains

lead must be secured to the back of the heater using ties

provided in the ﬁ xing kit. Ensure sufﬁ cient spare cable is

available to make the mains connection.