- ページ 18
カーレシーバー Pioneer MXT-X176UIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer MXT-X176UI 24 ページ。
ページを印刷する
Installing the microphone
(Only for MXT-X376BT)
The microphone should be placed directly
in front of the driver at a suitable distance
to pick up their voice clearly.
CAUTION
It is extremely dangerous to allow the
microphone lead to become wound
around the steering column or shift lever.
Be sure to install the microphone in such a
way that it will not obstruct driving. It is
recommended to use the clamps (sold
separately) to arrange the lead.
To install on the sun visor
1
Fit the microphone lead into the
groove.
Microphone
lead
Groove
2
Install the microphone clip on the sun
visor.
Lowering the sun visor reduces the
voice recognition rate.
18
En
Microphone clip
To install on the steering
column
1
Slide the microphone base to detach it
from the microphone clip.
Microphone
Microphone clip
Microphone base
2
Install the microphone on the rear side
of the steering column.
Double-sided tape
Speaker installation
Front
A 45°
B ф 4.3 mm holes (3/16 in. Dia.)
C ф 142 mm (5-5/8 in. Dia.)
D 123 mm (4-7/8 in.)
E 113 mm (4-1/2 in.)
F 100 mm (3-7/8 in.)
G 123 mm (4-7/8 in.)
H 100 mm (3-7/8 in.)
I 113 mm (4-1/2 in.)
Side
A 13 mm (1/2 in.)
B 41 mm (1-5/8 in.)
C ф 65 mm (2-5/8 in. Dia.)
D ф 128 mm (5 in. Dia.)
E ф 158 mm (6-1/4 in. Dia.)
F ф 170 mm (6-3/4 in. Dia.)
G 27 mm (1 in.)
1
Determine the location of the speaker
as illustrated.
2
Make holes as illustrated. (If needed,
remove the door upholstery.)
ф 4.3 mm (3/16 in. Dia.)
ф 128 mm (5 in. Dia.)