Pioneer MXT-X176UI 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Pioneer MXT-X176UI에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer MXT-X176UI 24 페이지.

페이지 인쇄

Installing the microphone

(Only for MXT-X376BT)

The microphone should be placed directly

in front of the driver at a suitable distance

to pick up their voice clearly.

CAUTION

It is extremely dangerous to allow the

microphone lead to become wound

around the steering column or shift lever.

Be sure to install the microphone in such a

way that it will not obstruct driving. It is

recommended to use the clamps (sold

separately) to arrange the lead.

To install on the sun visor

Fit the microphone lead into the

groove.

Microphone

lead

Groove

Install the microphone clip on the sun

visor.

Lowering the sun visor reduces the

voice recognition rate.

Microphone clip

To install on the steering

column

Slide the microphone base to detach it

from the microphone clip.

Microphone

Microphone clip

Microphone base

Install the microphone on the rear side

of the steering column.

Double-sided tape

Speaker installation

Front

A 45°

B ф 4.3 mm holes (3/16 in. Dia.)

C ф 142 mm (5-5/8 in. Dia.)

D 123 mm (4-7/8 in.)

E 113 mm (4-1/2 in.)

F 100 mm (3-7/8 in.)

G 123 mm (4-7/8 in.)

H 100 mm (3-7/8 in.)

I 113 mm (4-1/2 in.)

Side

A 13 mm (1/2 in.)

B 41 mm (1-5/8 in.)

C ф 65 mm (2-5/8 in. Dia.)

D ф 128 mm (5 in. Dia.)

E ф 158 mm (6-1/4 in. Dia.)

F ф 170 mm (6-3/4 in. Dia.)

G 27 mm (1 in.)

Determine the location of the speaker

as illustrated.

Make holes as illustrated. (If needed,

remove the door upholstery.)

ф 4.3 mm (3/16 in. Dia.)

ф 128 mm (5 in. Dia.)