- ページ 19

ステレオ・レシーバー Pioneer VSX-9500S VSX-7500SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-9500S VSX-7500S 48 ページ。
Pioneer VSX-9500S VSX-7500S にも：取扱説明書 (48 ページ)

ページを印刷する

TUNER

AUTO OR MANUAL TUNING

1. Press the POWER

switch to the ON position.

NOTE:

8e sure to turn the TAPE 2 MONITOR switch OFF when listening to

AM or FM broadcasts.

2. Use the BAND selector to choose either FM or AM.

AUTO tuning:

Auto tuning is convenient when you do not remember the frequency

of a desired station, or when you wish to find stations that you do not

normally listen to

For AUTO tuning:

3. Set the AUTO/MANUAL

switch to the auto tuning mode.

« In the Auto Tuning mode, the | AUTO | indicator will light.

4. Press the ''+"' or ''~"' switch of the TUNING switches.

° Pressing '' +' causes scanning to take place in the direction of

increasing frequency. Pressing ''— '' causes scanning to take piace

in the direction of decreasing frequency.

* When a station is received, scanning will stop (the | TUNED

indicator lights). If you wish to receive a different station, press

the TUNING switch (''+" or "'~"') again.

HITS

switch

MANUAL

tuning:

This is the ''normal"' tuning mode. Each time the TUNING switch "+ °"

or' —"' is pressed, the tuning frequency changes by one channel step,

allowing you to find stations manually.

For MANUAL tuning:

3. Set the AUTO/MANUAL

switch to the manual tuning mode.

¢ When in the Manual Tuning mode, the | AUTO

jindicator will go

out.

4. Press the '+' or "'—"' switch of the TUNING switch as necessary

to set to the frequency of the desired station.

* Each time the switch is pressed, the tuning frequency will change

by one step in the direction corresponding to the switch pressed.

When

pressed continuously, the reception frequency will also

change continuously.

* When a station is received, the [TUNED J indicator will light.

* When the received station is broadcasting a program in FM stereo,

the | STEREO

|indicator will light. The STEREO indicator will not

light if the FM MODE switch is set to FM MONO.

5. Adjust the MASTER VOLUME

and tone as desired.

NOTE:

for very distant stations or stations with very weak signals. In this

event, Manual Tuning is recommended,

¢ The}

TUNED

jindicator may not light with broadcasts received over

long distances, or when the broadcast signals are extremely weak.

HITS function

When the HITS switch is pressed, the receiver searches from the current

frequency for the nearest station and tunes in the first one it finds. If

no receivable siation is found within the band range, the receiver returns

to the state it was in before the switch was pressed.