- ページ 9

スピーカーシステム Pioneer PDP-S55-LRのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDP-S55-LR 41 ページ。 Pioneer speaker system operating instructions
Pioneer PDP-S55-LR にも：サービスマニュアル (3 ページ)

ページを印刷する

1. Specifications

3 Loosely screwing the screws (M5) into place on

the top attachment pieces (2 locations).

Note:

To install the Plasma Display on a wall, first attach the

attachment pieces to the Plasma Display then install it on

the wall. After installing the Plasma Display on the wall, it

may be impossible to tighten the screws on the

attachment pieces.

4 Attaching the screws (M5) that have been

loosely screwed into place on the hooks on top

of the speakers. Loosely screw the screws (M5)

into place with the screw holes on the

attachment pieces on the bottom aligned with

the holes in the hooks on the bottom of the

speakers.

5 Tighten the screws just inserted firmly into

place (4 locations).

¶ Tighten the screws while pushing the speakers lightly

against the Plasma Display. Check to be sure that all

four screws have been screwed firmly into place.

¶ If there is a large gap between the Plasma Display

and the speakers, adjust them after slightly loosening

the screws that were tightened in step 2. After

adjustment, re-tighten the screws.

¶ To install the Plasma Display on a wall, it is

recommended that you first remove the speaker

units, then after the Plasma Display has been

installed on the wall, re-attach the speaker units to

the Plasma Display.

Warning

¶ Never hold the speakers when speakers are

attached to the monitor to move the monitor.

Doing so might result in the monitor falling, and

this in turn might result in bodily injury.

¶ Firmly tighten the screws. The speakers may fall

causing injuries.

English