- ページ 6

スピーカーシステム Pioneer PIONEER S-IC621DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PIONEER S-IC621D 17 ページ。 Architectural loudspeaker
Pioneer PIONEER S-IC621D にも：パンフレット＆スペック (8 ページ), 仕様 (1 ページ)

ページを印刷する

14 Adjust the angle of the tweeter.

Gently press the edge of the tweeter flange to adjust the

angle of the tweeter as desired. Be careful not to touch

the diaphragm while doing this.

15 Adjust the setting of the treble control as

necessary.

• The standard setting is 0.

• The treble switch located in the front of the speaker

has two positions to choose from, +/0.

16 Attach the butyl rubber tapes on the inside of the

grille.

Attach the eight butyl rubber tapes

to each grille, lining up the butyl

rubber tapes to the marks on the

inside of the grille.

Then peel off the protective paper.

17 Attach the grille to the speaker.

The grille is designed with a specific mounting

orientation. Gently push the grille onto the speaker, lining

up the one section of the edge of the grille to the groove

in the speaker. Then line up the entire grille to the groove

in the speaker and attach the grille by pressing in all

around the edge.

Orientate the grille so that the

notch is positioned adjacent to

the Pioneer logo.

Make sure to press on the

edges. Pressing on the

middle of the grille will

cause it to be deformed.

• Once you have pushed it in, make sure you press it

firmly against the speaker so that the grille doesn't

fall off and cause an accident.

• To remove the grille, use the supplied tool to hook

into the holes located near the edges and pull the

grille out. When doing this, make sure to pull the

edges out evenly. Forcing the grille out from one edge

alone will cause the grille to be deformed.

Make sure not to

touch the

diaphragm as it can

be easily damaged.

Connections

Connecting to an amplifier

Make sure you have read the connection instructions in

the manual supplied with the amplifier and that all

equipment is turned off before making any connections.

• When using a set of speakers connected to an

amplifier, you won't be able to obtain the correct

stereo effect if the polarity (+, –) of one of the

speakers (left or right) is reversed.

Additional Information

Cleaning the speaker

Use a dust brush to wipe off dust and dirt.

Never use furniture wax, cleaners, thinners, benzine,

insecticide sprays or other chemicals on or near the

speakers, since these will corrode the surfaces.