- ページ 11

スクーター Cruza XR500のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Cruza XR500 15 ページ。 Electric power scooters
Cruza XR500 にも：ユーザーマニュアル (14 ページ)

ページを印刷する

However, it may be necessary to adjust the brakes from time to time.

Fig. 12

Fig. 13

Squeaky Brakes

The brakes may squeak before they are broken in. This is normal and will not

affect the function or performance of the brakes. With continued use the

squeak should go away.

TIRES

AND WHEELS

The Cruza XR500 uses an identical rim and tire assembly on the front and

rear wheels, which means that the tires can be rotated. The wheels are

actually two wheel halves (split rim) bolted together to make it easier to remove

and replace the tire and tube.

The rear wheel is fitted with a special spacer to accommodate the chain

sprocket, while the front wheel has a bracket for the disc brake.

To adjust the rear brakes:

1. With one hand, depress the brake

caliper using your thumb

forefinger (Fig.12).

2. With the other hand, adjust the

tension screw on the brake line.

a. Turn

the

clockwise to loosen the brake.

b. Turn

the

counterclockwise

brake.

To adjust the front brakes:

For brakes that are adjusted too tight:

1. Loosen the tension screw on the

right hand brake lever by rotating it

counter-clockwise until the wheel

spins freely.

For brakes that are adjusted too loose:

1. Tighten the tension screw on the

right hand brake lever by rotating it

clockwise until the wheel has a

slight drag.

For further adjustment:

1. Locate the adjustment screw on the

front

brake

assembly

above the front wheel, Fig. 13)

Tighten or loosen as necessary.

Page

and

tension

screw

tension

screw

tighten

(located