Cruza XR500 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Скутер Cruza XR500. Cruza XR500 15 сторінок. Electric power scooters
Також для Cruza XR500: Посібник користувача (14 сторінок)
Друкувати сторінкуHowever, it may be necessary to adjust the brakes from time to time.
Fig. 12
Fig. 13
Squeaky Brakes
The brakes may squeak before they are broken in. This is normal and will not
affect the function or performance of the brakes. With continued use the
squeak should go away.
TIRES
AND WHEELS
The Cruza XR500 uses an identical rim and tire assembly on the front and
rear wheels, which means that the tires can be rotated. The wheels are
actually two wheel halves (split rim) bolted together to make it easier to remove
and replace the tire and tube.
The rear wheel is fitted with a special spacer to accommodate the chain
sprocket, while the front wheel has a bracket for the disc brake.
To adjust the rear brakes:
1. With one hand, depress the brake
caliper using your thumb
forefinger (Fig.12).
2. With the other hand, adjust the
tension screw on the brake line.
a. Turn
the
clockwise to loosen the brake.
b. Turn
the
counterclockwise
brake.
To adjust the front brakes:
For brakes that are adjusted too tight:
1. Loosen the tension screw on the
right hand brake lever by rotating it
counter-clockwise until the wheel
spins freely.
For brakes that are adjusted too loose:
1. Tighten the tension screw on the
right hand brake lever by rotating it
clockwise until the wheel has a
slight drag.
For further adjustment:
1. Locate the adjustment screw on the
front
brake
assembly
above the front wheel, Fig. 13)
Tighten or loosen as necessary.
Page
10
and
tension
screw
tension
screw
to
tighten
(located