Cruza XR500 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Скутер Cruza XR500. Cruza XR500 15 сторінок. Electric power scooters
Також для Cruza XR500: Посібник користувача (14 сторінок)

Друкувати сторінку

Tire wear will differ based on rider weight, riding conditions and care.

Replacement tires can be obtained at your local Cruza dealer, through

motorcycle shops, or from the Cruza website at www.SAscootershop.co.za.

Tire Pressure

The tire must be inflated to a maximum of 32 P.S.I. It is also recommended to

use a tube additive like 'slime' available from any motorcycle shop, to avoid

inconvenient punctures.

Empty all air from the tire, prior to loosening the bolts to split the rim.

MAINTENANCE

RECOMMENDED TOOLS

To adjust and service the Cruza XR500 you will need the following tools:

Allen Wrenches: 3/4/5/6 mm

Wrenches: 10/13/13 mm Open end wrench

Large Adjustable Crescent Wrench

Philips Head Screwdrivers

Oil, Grease or generic lubricant

ADJUSTING THE

HANDLEBAR BEARINGS

The handlebars will come adjusted from the factory. However, riding on

rough terrain and general use may cause the handlebars to become loose over

time. It may be necessary to adjust the handlebar bearings from time to time.

To adjust the handlebars:

1. Rotate the handle bar as far right as it will

go to expose the HEAD UNIT. (See fig

left)

2. Using a large adjustable wrench, gently

turn the BEARING LOCK clockwise to

tighten. *DO NOT OVER TIGHTEN OR

IT WILL DAMAGE THE BEARINGS.

Page