- ページ 17

モニター Pioneer PDP 503CMXのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDP 503CMX 44 ページ。 Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Pioneer PDP 503CMX にも：テクニカル・マニュアル (25 ページ), クイックリファレンスパーツリスト (12 ページ)

ページを印刷する

1. Connection to Input1 and Input2

Installation using the optional PIONEER stand or

installation bracket

÷ Please be sure to request installation or mounting of this unit

or the installation bracket by an installation specialist or the

dealer where purchased.

÷ When installing, be sure to use the bolts provided with the

stand or installation bracket.

÷ For details concerning installation, please refer to the

instruction manual provided with the stand or installation

bracket.

Installation using accessories other than the

PIONEER stand or installation bracket (sold

separately)

÷ When possible, please install using parts and accessories

manufactured by PIONEER. PIONEER will not be held

responsible for accident or damage caused by the use of parts

and accessories manufactured by other companies.

÷ For custom installation, please consult the dealer where the

unit was purchased, or a qualified installer.

b hole

a hole

b hole

Rear view diagram (PDP-503CMX)

a hole

b hole

Rear view diagram (PDP-433CMX)

Air vents (fan)

b hole

a hole

Center line

b hole

Air vents (fan)

a hole

Center line

b hole

Installation and Connections

Wall-mount installation of the unit

This unit has been designed with bolt holes for

wall-mount installation, etc. The installation holes that can

be used are shown in the diagram below.

÷ Be sure to attach in 4 or more locations above and

below, left and right of the center line.

÷ Use bolts that are long enough to be inserted 1/2 inch

(12 mm) to 11/16 inch (18 mm) into the main unit from

the attaching surface for both a holes and b holes.

Refer to the side view diagram below.

÷ As this unit is constructed with glass, be sure to install

it on a flat, unwarped surface.

CAUTION

To avoid malfunction, overheating of this unit, and

possible fire hazard, make sure that the vents on the

main unit are not blocked when installing. Also, as hot

air is expelled from the air vents, be careful of

deterioration and dirt build up on rear surface wall, etc..

Main unit

Center line

b hole

1/2 inch (12 mm) to 11/16 inch (18 mm)

Side view diagram

CAUTION

Please be sure to use an M8 (Pitch = 1.25 mm)

bolt. (Only this size bolt can be used.)

CAUTION

This display unit weighs at least 67 lbs (30 kg)

Center line

and has little front-to-back depth, making it very

unstable when stood on edge. As a result, two

b hole

or more persons should cooperate when

unpacking, moving, or installing the display.

CAUTION

This unit incorporates a thin design. To ensure

safety if vibrated or shaken, please be sure to

take measures to prevent the unit from tipping

over.

Attaching surface

Installation

bracket, etc..

a hole

Bolt

1/2 inches (12 mm) to

11/16 inches (18 mm)

Bolt

b hole