- ページ 4

アクセサリー Aeotec Door / Window Sensor 7のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec Door / Window Sensor 7 10 ページ。
Aeotec Door / Window Sensor 7 にも：ユーザーマニュアル (9 ページ), クイック・スタート・マニュアル (11 ページ), ユーザーマニュアル (9 ページ)

31/07/2019

For German style windows there the window sits on top of the window frame mounting on the side of the window is highly

recommended. If no tilting detection is used, the sensor can be placed on any position of the door or the window. In case

tilting detection is desired the sensor should be placed on the upper side of the window.

Installation of the flat magnet

When installing the flat magnet in a hidden location, make sure that it is on the longer side as seen from the mark on the

Door / Windows Sensor 7.

Adding your Door / Windows Sensor 7 to Z-Wave network.

1. Set your Z-Wave controller into pairing mode.

2. Triple-click the tamper switch on Door / Window Sensor 7 - this begins to blink five times

https://aeotec.freshdesk.com/support/solutions/articles/6000218764-door-windows-sensor-7-user-guide

Door / Window 7 user guide : Aeotec Group

4/10