Aeotec Door / Window Sensor 7 사용자 설명서 - 페이지 4

{카테고리_이름} Aeotec Door / Window Sensor 7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Door / Window Sensor 7 10 페이지.
Aeotec Door / Window Sensor 7에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 빠른 시작 매뉴얼 (11 페이지), 사용자 설명서 (9 페이지)

페이지 인쇄
Aeotec Door / Window Sensor 7 사용자 설명서
31/07/2019
For German style windows there the window sits on top of the window frame mounting on the side of the window is highly
recommended. If no tilting detection is used, the sensor can be placed on any position of the door or the window. In case
tilting detection is desired the sensor should be placed on the upper side of the window.
Installation of the flat magnet
When installing the flat magnet in a hidden location, make sure that it is on the longer side as seen from the mark on the
Door / Windows Sensor 7.
Adding your Door / Windows Sensor 7 to Z-Wave network.
1. Set your Z-Wave controller into pairing mode.
2. Triple-click the tamper switch on Door / Window Sensor 7 - this begins to blink five times
https://aeotec.freshdesk.com/support/solutions/articles/6000218764-door-windows-sensor-7-user-guide
Door / Window 7 user guide : Aeotec Group
4/10