Aeotec Door / Window Sensor 7 사용자 설명서 - 페이지 5

{카테고리_이름} Aeotec Door / Window Sensor 7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Door / Window Sensor 7 10 페이지.
Aeotec Door / Window Sensor 7에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 빠른 시작 매뉴얼 (11 페이지), 사용자 설명서 (9 페이지)

페이지 인쇄
Aeotec Door / Window Sensor 7 사용자 설명서
31/07/2019
3. After completion of the inclusion, it lights up once before it goes out.
4. Close the cover
Functions of Door / Window Sensor 7.
Open/Close
Once installed the sensor will report "open" and "close" status changes to a central Z-Wave controller using notification
commands.
Tilt detection
The tilt detection allows reporting the way a window is opened. This is accomplished using the command class "binary
sensor - tilt-type". In case the window is closed or opened without tilting the tilt sensor will report "Off". In case the
window is tilted an "On" is reported. The angle of inclination of the window must be at least 5°.
Advances functions.
Screw Terminal.
With parameter #1 you can choose between the internal magnet or the external connections such as push buttons or dry
contact sensors.
#1: Not used.
#2: Not used.
https://aeotec.freshdesk.com/support/solutions/articles/6000218764-door-windows-sensor-7-user-guide
Door / Window 7 user guide : Aeotec Group
5/10