- ページ 28

ウォーターヒーター Ariston ST 100 ProTechのPDF インストール、サービス、使用説明書をオンラインで閲覧またはダウンロードできます。Ariston ST 100 ProTech 36 ページ。 Unvented hot water storage cylinders
Ariston ST 100 ProTech にも：取付・使用説明書 (24 ページ), ユーザーマニュアル (16 ページ), 設置、サービス、操作に関する説明書 (34 ページ)

ページを印刷する

Ariston ST 100 ProTech インストール、サービス、使用説明書

unvented controls(s)

Check controls as per the following:

1) Line strainer - with the water supply turned off remove screen from

strainer and clean of any detritus;

2) Expansion vessel - with the water supply turned off and taps open, check

expansion vessel pressure and top up as necessary;

3) Temperature & pressure relief valve - with the water supply turned on,

check manually by lifting the test lever/turning the test knob (ensure valve

closes after testing);

4) Expansion relief valve - check manually by turning the test knob (ensure

valve closes after testing);

5) Discharge pipes (D1) - from both temperature & pressure relief and

expansion relief valve for obstructions;

6) Tundish & discharge pipe (D2) - open either valve gradually to produce a

full bore discharge into tundish and D2 without any back pressure;

7) Pressure reducing valve - check that the correct outlet pressure is being

maintained by recording the pressure at an in-line terminal fitting i.e. tap.

thermostats

Ensure that all thermostats adjusted for the correct temperature setting, this

should be between 60 and 65°C.

After servicing, complete all relevant sections of the Benchmark Checklist

located on page 35 of this manual.

ote

Here tHere is A possiBility oF scAle ForMinG

tHerMostAt Be set to Below

incoMinG MAins supply

it is recoMMenDeD tHe

AnD A scAle reDucer Be FitteD on tHe