Ariston ST 100 ProTech Инструкции по установке, обслуживанию и эксплуатации - Страница 28

Просмотреть онлайн или скачать pdf Инструкции по установке, обслуживанию и эксплуатации для Водонагреватель Ariston ST 100 ProTech. Ariston ST 100 ProTech 36 страниц. Unvented hot water storage cylinders
Также для Ariston ST 100 ProTech: Инструкция по установке и использованию (24 страниц), Руководство пользователя (16 страниц), Инструкции по установке, обслуживанию и эксплуатации (34 страниц)

unvented controls(s)

Check controls as per the following:

1) Line strainer - with the water supply turned off remove screen from

strainer and clean of any detritus;

2) Expansion vessel - with the water supply turned off and taps open, check

expansion vessel pressure and top up as necessary;

3) Temperature & pressure relief valve - with the water supply turned on,

check manually by lifting the test lever/turning the test knob (ensure valve

closes after testing);

4) Expansion relief valve - check manually by turning the test knob (ensure

valve closes after testing);

5) Discharge pipes (D1) - from both temperature & pressure relief and

expansion relief valve for obstructions;

6) Tundish & discharge pipe (D2) - open either valve gradually to produce a

full bore discharge into tundish and D2 without any back pressure;

7) Pressure reducing valve - check that the correct outlet pressure is being

maintained by recording the pressure at an in-line terminal fitting i.e. tap.

Ensure that all thermostats adjusted for the correct temperature setting, this

should be between 60 and 65°C.

After servicing, complete all relevant sections of the Benchmark Checklist

located on page 35 of this manual.

ote

Here tHere is A possiBility oF scAle ForMinG

tHerMostAt Be set to Below

incoMinG MAins supply

it is recoMMenDeD tHe

AnD A scAle reDucer Be FitteD on tHe