- ページ 12

ボイラー Ariston GENUS 41-116-01のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Ariston GENUS 41-116-01 44 ページ。 Type c
Ariston GENUS 41-116-01 にも：取付説明書 (32 ページ)

Soft-light

Max Heating

Anti-cycling

Device

Adjustment

Supplied By www.heating spares.co Tel. 0161 620 6677

10. Remove the pipe from the pressure gauge and connect screw "C" to the

pressure outlet in order to seal off the gas.

11. Carefully check the pressure outlets for gas leaks (valve inlet

and outlet).

IMPORTANT!

Whenever you disassemble and reassemble the gas connections, always

check for leaks using a soap and water solution.

Setting the anti-cycling device

This appliance is equipped with a potentiometer which delays the ignition of

the heating control and is situated on the P.C.B. (see the electrical diagrams).

By adjusting the potentiometer, it is possible to change the time interval

between the burner shutting down and its next ignition.

It is preset at 1 minute and can be adjusted from 0 to 2 minutes.

Use this control in particular situations where continuous shutting down and

ignition of the main burner occurs.

Fig. 1.25

Fig. 1.26

Removing the spark generator (SIT Sigma gas valve)

1. Disconnect ignition leads "Q" by pulling upwards

(see fig. 1.25) ;

2. Remove the screws "R" (see fig. 1.26) with a Pozidrive

No. 2 star tip screwdriver;

3. Remove the spark generator.

Fig. 1.27

B005