- ページ 6

ボイラー Ariston microSYSTEM 10 RFFIのPDF 整備要領をオンラインで閲覧またはダウンロードできます。Ariston microSYSTEM 10 RFFI 24 ページ。 Type c boilers
Ariston microSYSTEM 10 RFFI にも：ユーザーマニュアル (16 ページ), 取付説明書 (20 ページ)

ページを印刷する

3. Remove screw "H" (F

4. Gently slide the electrode downward (F

. 1.14

To replace, repeat the steps in reverse order, paying

particular attention to the following:

a - Centre the electrode in the positioning hole carefully,

otherwise the electrode may break;

b -Ensure that the left hand and right hand electrodes are

located the correct way round (facing each other), to

give the correct spark gap;

c - Check that the cables have been connected correctly;

d -Check that the rubber gasket covers the cable/ electrode

connection point completely.

. 1.14);

. 1.15).

1.3.4 Removing the main heat exchanger

1. Drain the boiler of water;

2. Release the overheat thermostat sensor "I" (F

3. Release the two connection nuts "J" connecting the

exchanger to the flow and return pipes (F

4. Remove the heat exchanger by sliding forward (F

1.18).

. 1.15

. 1.16);

. 1.17);

Fig. 1.16

. 1.17

. 1.18