Ariston microSYSTEM 10 RFFI Instrukcje serwisowe - Strona 6

Przeglądaj online lub pobierz pdf Instrukcje serwisowe dla Kocioł Ariston microSYSTEM 10 RFFI. Ariston microSYSTEM 10 RFFI 24 stron. Type c boilers
Również dla Ariston microSYSTEM 10 RFFI: Podręcznik użytkownika (16 strony), Instrukcja instalacji (20 strony)

Drukuj stronę

Ariston microSYSTEM 10 RFFI Instrukcje serwisowe

3. Remove screw "H" (F

4. Gently slide the electrode downward (F

. 1.14

To replace, repeat the steps in reverse order, paying

particular attention to the following:

a - Centre the electrode in the positioning hole carefully,

otherwise the electrode may break;

b -Ensure that the left hand and right hand electrodes are

located the correct way round (facing each other), to

give the correct spark gap;

c - Check that the cables have been connected correctly;

d -Check that the rubber gasket covers the cable/ electrode

connection point completely.

. 1.14);

. 1.15).

1.3.4 Removing the main heat exchanger

1. Drain the boiler of water;

2. Release the overheat thermostat sensor "I" (F

3. Release the two connection nuts "J" connecting the

exchanger to the flow and return pipes (F

4. Remove the heat exchanger by sliding forward (F

1.18).

. 1.15

. 1.16);

. 1.17);

Fig. 1.16

. 1.17

. 1.18