- ページ 16

洗濯機 Whirlpool 8TWFW5620HW0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 8TWFW5620HW0 32 ページ。 Front-loading automatic washer

ページを印刷する

Add liquid fabric softener to single

load dispenser, if desired

Pour a measured amount of liquid fabric softener into liquid

fabric softener compartment. Always follow manufacturer's

directions for correct amount of fabric softener, based on

your load size.

Fabric softener is always dispensed in the last rinse, even

if Extra Rinse is selected.

IMPORTANT: Do not overfill, dilute, or use more than

the manufacturer-recommended quantity of fabric softener.

Do not fill past the "MAX" line. Overfilling dispenser will

cause fabric softener to immediately dispense into washer.

■ Do not spill or drip any fabric softener onto the clothes.

■ Do not use liquid fabric softener dispenser balls in this

washer. They will not dispense correctly.

■ Do not use fabric softener sheets, as they can stain

the load.

Add liquid chlorine bleach to

single load dispenser, if desired

Add liquid chlorine bleach to the bleach compartment.

Do not overfill, dilute, or use more than 2 ⁄ 3 cup (165 mL).

Do not use color-safe bleach or Oxi in the same cycle with

liquid chlorine bleach.

IMPORTANT:

■ Always measure liquid chlorine bleach. Use a measuring

cup with a pour spout; do not guess.

■ Do not fill beyond the "MAX" line. Overfilling could

cause garment damage.

■ Do not use thickened, easy-pour, or no-splash bleach

when running the Clean Washer with affresh cycle, as

excess suds may occur.

■ On some models: Do not add liquid chlorine bleach to

the bulk dispenser.

■ Slowly close dispenser drawers. Make sure the drawers

are closed completely.

Touch POWER to turn on washer

Select a wash program/cycle

First, choose what you want to wash by touching a selection in

the top row. Next, choose how you want to wash your load by

touching a selection in the bottom row to choose the best cycle

combination for your load. See "Cycle Guide" for details on

cycles features.

Adjust cycle modifiers, if desired*

The led indicator lights will show the default settings for the

selected cycle. To adjust a setting, touch its name – Temp,

Spin, or Soil. Adjusting settings may change the Estimated

Time Remaining. Tightly packing the load, unbalanced loads,

or excessive suds may also cause the washer to increase the

cycle time.

10.

Select any additional options*

hold 3 sec for

Cycle Signal

To add an option to the cycle, touch its name – Steam Clean,

Extra Rinse, or Wash & Dry. If you wish to use the bulk dispenser

(on some models), select Load & Go. For other options, touch

and hold the buttons indicated for 3 seconds. To remove an

option from the selected cycle, touch that button again.

* Not all options and settings are available with all cycles.

See "Cycle Guide" for available options and settings.

hold 3 sec for

Control Lock

FanFresh

PreSoak