Whirlpool 8TWFW5620HW0 Kullanım ve Bakım Kılavuzu - Sayfa 16
Yıkayıcı Whirlpool 8TWFW5620HW0 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 8TWFW5620HW0 32 sayfaları. Front-loading automatic washer
Sayfayı Yazdır
5.
Add liquid fabric softener to single
load dispenser, if desired
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer's
directions for correct amount of fabric softener, based on
your load size.
Fabric softener is always dispensed in the last rinse, even
if Extra Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than
the manufacturer-recommended quantity of fabric softener.
Do not fill past the "MAX" line. Overfilling dispenser will
cause fabric softener to immediately dispense into washer.
■ Do not spill or drip any fabric softener onto the clothes.
■ Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
■ Do not use fabric softener sheets, as they can stain
the load.
6.
Add liquid chlorine bleach to
single load dispenser, if desired
Add liquid chlorine bleach to the bleach compartment.
Do not overfill, dilute, or use more than 2 ⁄ 3 cup (165 mL).
Do not use color-safe bleach or Oxi in the same cycle with
liquid chlorine bleach.
IMPORTANT:
■ Always measure liquid chlorine bleach. Use a measuring
cup with a pour spout; do not guess.
■ Do not fill beyond the "MAX" line. Overfilling could
cause garment damage.
■ Do not use thickened, easy-pour, or no-splash bleach
when running the Clean Washer with affresh cycle, as
excess suds may occur.
■ On some models: Do not add liquid chlorine bleach to
the bulk dispenser.
■ Slowly close dispenser drawers. Make sure the drawers
are closed completely.
7.
Touch POWER to turn on washer
8.
Select a wash program/cycle
First, choose what you want to wash by touching a selection in
the top row. Next, choose how you want to wash your load by
touching a selection in the bottom row to choose the best cycle
combination for your load. See "Cycle Guide" for details on
cycles features.
9.
Adjust cycle modifiers, if desired*
The led indicator lights will show the default settings for the
selected cycle. To adjust a setting, touch its name – Temp,
Spin, or Soil. Adjusting settings may change the Estimated
Time Remaining. Tightly packing the load, unbalanced loads,
or excessive suds may also cause the washer to increase the
cycle time.
10.
Select any additional options*
hold 3 sec for
Cycle Signal
To add an option to the cycle, touch its name – Steam Clean,
Extra Rinse, or Wash & Dry. If you wish to use the bulk dispenser
(on some models), select Load & Go. For other options, touch
and hold the buttons indicated for 3 seconds. To remove an
option from the selected cycle, touch that button again.
* Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
hold 3 sec for
hold 3 sec for
hold 3 sec for
Control Lock
FanFresh
PreSoak