ページを印刷するCARE AND CLEANING
Do as follows:
1 Insert a screwdriver or the like into the hole on the
agitator as illustrated and carefully pry to the left.
2 Use your other hand to grasp the agitator and pull it
towards you.
3 Lift the agitator.
4 Remove any objects.
5 Place the agitator in the mounting hole with the
F-mark towards you. Ensure that all the agitator
fasteners are in their holes in the drum. Push it in until
it catches.
10
IF YOU HAVE HARD WATER
If you live in an area with hard water (high limescale
content), a greyish-white coating may form on the washer
drum. To remove this, empty a sachet of citric acid,
approx. 20 gram, into the washer drum and run any 90 °C
programme. Repeat if necessary.