- ページ 12

洗濯機 Whirlpool AWO/C 0714のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool AWO/C 0714 14 ページ。 7kg, 1400rpm, 6th sense washing machine with clean +, white wwdc 7410
Whirlpool AWO/C 0714 にも: 取扱説明書 (14 ページ), プログラム表 (2 ページ)

Whirlpool AWO/C 0714 取扱説明書

ELECTRICAL CONNECTION

For Great Britain only
Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a
BS 1363A 13amp fused plug, to change a fuse in this type
of plug use an A.S.T.A. approved fuse to BS 1362 type and
proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and
if the fuse cover is lost the plug must not be used until a
correct replacement is fitted.
Correct replacement are identified by the colour insert or
the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local
electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket is also
frequently apply, but a third type of plug and socket is also
frequently apply, but a third type of plug and socket is also
used, the 2-pin, side earth type.
Socket outlet / plug (valid for both countries)
Socket outlet / plug (valid for both countries)
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
If the fitted plug is not suitable for your socket outlet,
If the fitted plug is not suitable for your socket outlet,
Please contact After-Sales service for further instruction.
Please contact After-Sales service for further instruction.
Please contact After-Sales service for further instruction.
Please do not attempt to change plug yourself. This
Please do not attempt to change plug yourself. This
Please do not attempt to change plug yourself. This
procedure needs to be carried out by a qualified technician
procedure needs to be carried out by a qualified technician
procedure needs to be carried out by a qualified technician
in compliance with the manufactures instructions and
in compliance with the manufactures instructions and
in compliance with the manufactures instructions and
current standard safety regulations.
current standard safety regulations.
current standard safety regulations.
GB 12