- ページ 6

冷蔵庫 Whirlpool EL88TRRWSのPDF 冷蔵庫取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool EL88TRRWS 28 ページ。 Trim kit
Whirlpool EL88TRRWS にも：寸法マニュアル (1 ページ), 取扱説明書 (24 ページ), エネルギー・マニュアル (2 ページ), 取付説明書 (20 ページ)

ページを印刷する

Handle

Move the door handle from one side of the door to the other.

Style 1

1. Loosen set screws located on side of handle at each end.

See Graphic 1-1.

2. Remove handle from grommets.

3. Using a

"hex-head socket wrench, remove the grommets

from the door.

4. Position the grommets on the opposite side of the door and

reinstall.

5. Position the handle over grommets on the opposite side of

the refrigerator door.

6. Ensure grommets are fitted into handle holes.

7. Tighten the upper and lower set screws with hex key

provided. Do not overtighten set screws.

Style 2

1. Slide the handle up and off the clips. See Graphic 1-2.

2. Using a flat-blade screwdriver, remove the screws from the

clips and remove the clips from the door.

3. Position the clips on the opposite side of the refrigerator door

and reinstall the screws.

4. Position handle over the clips.

5. Apply even pressure and push down to lock in place.

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge Graphic 1C. Replace the

refrigerator door.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top

Hinge Graphic 1B. Do not tighten the screws completely.

3. Line up the door so that the bottom aligns evenly with the

cabinet. Tighten all screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are

in place. Reinstall top hinge cover. See Top Hinge

Graphic 1B.

2. Replace the base grille. See Base Grille Graphic 1A.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

3. Plug into a grounded 3 prong outlet.

4. Reset the control. See "Using the Control."

5. Return all removable door parts to door and food to

refrigerator.