- ページ 6

冷蔵庫 Whirlpool WRT779RFYW10のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool WRT779RFYW10 41 ページ。

ページを印刷する

Refrigerator

Door

1. Remove refrigerator handle assembly as shown. Keep all

parts together. See Graphic 6-1.

2. Remove shoulder handle screw from refrigerator door as

shown. Keep all parts together. See Graphic 6-2.

3. Remove door hinge hole plug from refrigerator door. Move to

opposite side hinge hole as shown in Graphic 3.

4. Remove door handle sealing screws. Move to opposite side of

refrigerator door as shown in Graphic 4.

5. Remove door handle seal screw front. Move to opposite side

of refrigerator door as shown in Graphic 7.

6. Position shoulder handle screw on opposite side of

refrigerator door and drive screw as show in Graphic 6-2.

7. Remove door stop. Move to opposite side of refrigerator door

as shown in Graphic 5.

8. Position refrigerator handle on opposite side of the refrigerator

door as shown in Graphic 6-3. Drive top two screws in handle

first. Align lower portion of handle and drive bottom screw.

9. Tighten all screws. Set aside refrigerator door until bottom

hinge is installed on refrigerator.

Style 2-Contour

Doors

Your model may have either plastic handles which extend from

the door or cup handles which are recessed into the doors.

See complete Style 2 graphics later in this section.

Round-Head

Door Handle

Handle Screw

Screw Hole Plug

Plastic Handles - Extend from the Door

(on some models)

Cabinet

1. Remove the 12-24 Torx ®t head hinge screws from handle side

and move them to opposite side. See Graphic 1-1.

2. Remove cabinet hinge hole plugs from cabinet top and move

them to opposite side hinge holes as shown in Graphic 1-2.

Freezer Door

1. Remove freezer handle assembly as shown. Keep all parts

together. See Graphic 3.

2. Remove door hinge hole plug. Move to opposite side as

shown in Graphic 4.

3. Remove door handle sealing screws. Move to opposite side of

freezer door as shown in Graphic 7.

4. Remove door stop. Move to opposite side of freezer door as

shown in Graphic 6.

5. Remove the hinge pin from the top hinge. Turn the hinge over

so that it is pointing in the opposite direction and reinsert the

hinge pin into the top hinge. See Graphic 2.

NOTE: When you reverse the door swing, a (left-hand side)

top hinge cover is provided for your convenience.

6. Position handle on opposite side of freezer door. Assemble

handles on door as shown in Graphic 3.

7. Tighten all screws. Set aside freezer door until hinges and

refrigerator compartment

door are in place.

Refrigerator

Door

1. Remove refrigerator handle assembly as shown. Keep all

parts together. See Graphic 5.

2. Remove door hinge hole plug from refrigerator door. Move to

opposite side hinge hole as shown in Graphic 4.

3. Remove door handle sealing screws. Move to opposite side of

refrigerator door as shown in Graphic 7.

4. Remove door stop. Move to opposite side of refrigerator door

as shown in Graphic 6.

5. Position refrigerator handle on opposite side of the refrigerator

door as shown in Graphic 5. Drive the top two screws in

handle first. Align the lower portion of the handle and fasten it

with the setscrew.

Tighten all screws. Set aside refrigerator door until bottom

hinge is installed on the opposite side of the refrigerator.

NOTE: For 21 cu ft models, transfer both the bottom hinge

assembly and the leveling foot to the opposite side.

Cup Style Handles - Recessed into the Door

(on some models)

Cabinet

1. Remove the 12-24 Torx ®t head screws from handle side and

move them to opposite side. See Graphic 1-1.

2. Remove cabinet hinge hole plugs from the cabinet top and

move them to opposite side hinge holes as shown in

Graphic 1-2.

Doors

1. Remove door hinge hole plug from top of freezer door. Move

to opposite side as shown in Graphic 3.

2. Remove door stop from both the freezer and refrigerator

doors and move to the other side. See Graphic 5.

Replace Doors and Hinges

NOTES:

•

Graphic may be reversed if door swing is reversed.

Provide additional support for the doors while the hinges are

being moved. Do not depend on the door magnets to hold the

doors in place while you are working.

Replace the parts for the bottom hinge as shown. Tighten

screws. Replace the refrigerator door.

NOTE: For 21 cu ft models, install both the bottom hinge

assembly and the leveling foot.

Assemble the parts for the center hinge as shown and tighten

all screws. See Center Hinge graphic. Replace the freezer

door.

3. Assemble the parts for the top hinge as shown in the Top

Hinge graphic. Do not tighten the screws completely.

4. Line up the doors so that the bottom of the freezer door aligns

evenly with the top of the refrigerator door. Tighten all screws.

Final Steps

Check all holes to make sure that hole plugs and screws are in

place. Reinstall top hinge cover. See Top Hinge graphic.

Style 1 - On the left-hand side of the base grille there is a

removable tab which is a bottom hinge hole plug. Break off

the tab from the base grille and insert the bottom hinge hole

plug into the bottom hinge holes. See Base Grille graphic.

2. Replace the base grille. See Base Grille graphic.

3. Plug in refrigerator or reconnect power.

4. Reset the controls. See "Using the Controls."

5. Return all removable door parts to doors and food to

refrigerator.