ページを印刷する
- 1. Table of Contents
- 2. Safe Installation and Use
- 3. Intended Use
- 4. Installation
- 5. Description of the Dryer
- 6. Cleaning and Maintenance
- 7. Cleaning the Door Filter
- 8. Cleaning the Bottom Filter
- 9. Drainage System
- 10. Door Reversibility
- 11. Energy Saving
- 12. Troubleshooting Guide/After-Sales Service
- 13. Ec Declaration of Conformity
- 14. Disposal
Door filter, water container or bottom filter indicator lamp on:
•
Door filter clean?
•
Water container empty?
•
Water container correctly positioned?
•
Bottom filter clean and correctly positioned?
Water droplets underneath the dryer:
•
Bottom filter correctly positioned?
•
Any lint on the bottom filter seal removed?
•
Any lint on the door seal removed?
•
Water container positioned correctly?
•
Dryer levelled?
After-Sales Service
If, after carrying out the above checks the malfunction persists or appears again, turn the dryer
off and call the After-Sales Service (refer to guarantee).
Please indicate:
•
The nature of the fault.
•
The dryer type and model.
•
The service code (the number after the word Service on the adhesive rating plate) on the lower side
of the door opening.
•
Your full address and phone number.
Manufacturer:
Whirlpool Europe s.r.l.
Viale Guido Borghi 27
21025 Comerio (VA)
Italy
EC Declaration of Conformity
•
This dryer has been designed, constructed and distributed in compliance with the safety
requirements of EC Directives:
•
2006/95/EC Low Voltage Directive.
•
2004/108/EC Electromagnetic Compatibility Directive.
17