- ページ 12

ドライヤー Whirlpool BYCD3722W0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool BYCD3722W0 19 ページ。 Electric and gas dryers

ページを印刷する

CARING

HJRYOURDKVER

Proper care of your dryer can extend its life and help your dryer operate efficiently.

CEANIN~ ME urn sam

Every load cleaning

The lint screen is located under a lid on top of the

dryer.

Clean it before each load.

A screen blocked

by lint can increase drying time.

To clean:

Open the lid and pull the lint screen towards you.

2. Roll lint off the screen with your fingers. Do not

rinse or wash screen to

remove lint. Wet lint is

hard to remove.

3. Push the lint screen firmly back into place and

close the lid.

IMPORTANT:

0 Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can

cause overheating

and damage to both the dryer

and fabrics.

0 Some towels made of synthetic fibers and natural

fibers (polyester and cotton blends) may shed

more lint than other towels, causing your dryer's

lint screen to fill up faster. Be sure to remove

lint from the lint screen before and after drying

new towels.

0 If lint falls into chute, double-check

exhaust hood

and clean out lint if necessary.

AS needed cleaning

Laundry detergents and fabric softeners can cause

a residue buildup on the lint screen. This buildup

can cause longer drying times for your clothes, or

cause the dryer to stop before your load is com-

pletely dry. You may be able to see this buildup,

or the lint may be falling off the screen because it

is clogged.

Clean the lint screen with a nylon brush every six

months or more frequently

if it becomes clogged

due to a residue buildup.

Use the following method:

Wet both sides of lint screen with hot water.

2. Wet a nylon brush with hot water and liquid

detergent; scrub lint

screen with the brush to

remove residue buildup.

3. Rinse screen with hot water.

4. Thoroughly

dry lint screen with a clean towel;

replace in dryer.