- ページ 21

ドライヤー Whirlpool CEM2743BQのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool CEM2743BQ 48 ページ。 Commercial dryer gas or electric
Whirlpool CEM2743BQ にも：取付説明書 (48 ページ)

ページを印刷する

ELECTRIC DRYER ELECTRICAL CONNECTIONS

Connecting 4-Wire Connection: Direct Wire

Connecting Neutral Ground and Neutral Wires (cont.)

2. Connect neutral ground wire (B) and place hooked end (hook

facing right) of neutral wire (white or center wire) (D) of direct

wire cable under center terminal block screw (A). Squeeze

hooked ends together and tighten screw.

Connecting Direct Wire Ground

3. Connect ground wire (green or bare wire) (E) of direct wire

cable under green external ground conductor screw (C).

Tighten screw.

Connecting 3-Wire Connection: Direct Wire

Use where local codes permit connecting cabinet-ground

conductor to neutral wire.

Direct wire cable must have 5 ft. (1.52 m) of extra length so

dryer can be moved if needed.

Strip 3

⁄

" (89 mm) of outer covering from end of cable. Strip

insulation back 1" (25 mm). If using 3-wire cable with ground

wire, cut bare wire even with outer covering. Shape ends of

wires into a hook shape.

Connecting Neutral Wire

1. Loosen or remove center terminal block screw (A).

Connecting Remaining Wires

4. Connect remaining wires under outer terminal block screws

(F). Squeeze hooked ends together and tighten screws.

2. Place hooked end of neutral wire (white or center wire) (D)

of direct wire cable under center terminal block screw (A),

hook facing right. Squeeze hooked end together and tighten

screw.

3. Connect remaining wires under outer terminal block screws

(F). Squeeze hooked ends together and tighten screws.

Finally, reinstall terminal block to dryer rear panel. Secure

cover with hold-down screw.

(FOR U.S.A. ONLY)