- ページ 15

ドライヤー Whirlpool WGD8300SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD8300S 48 ページ。 Dimensions
Whirlpool WGD8300S にも：寸法と設置について (1 ページ), 寸法 (1 ページ)

ページを印刷する

DRYER USE

Explosion Hazard

Keep flammable

materials

and vapors, such as

gasoline, away from dryer.

Do not dry anything

that has ever had anything

flammable

on it (even after washing).

Failure to follow

these instructions can result in death,

explosion,

or fire.

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow

these instructions can result in death

or fire.

Follow these basic steps to start your dryer. Please refer to

specific sections of this manual for more detailed information.

1. Clean lint screen before each load. See "Cleaning the Lint

Screen."

2. Place laundry into dryer and shut door.

3. Press POWER.

Point the dial to an Auto or Manual Cycle. The preset settings

for Auto or Manual Cycles will illuminate. The estimated (auto

cycle) or actual (manual) cycle time (in minutes) will show in

the display.

NOTE: A preset time is displayed when an automatic cycle is

selected. During the first few minutes of the drying process,

the cycle time may automatically vary from the preset time

based on the size and fabric type of the load. Toward the end

of the drying process, the estimated time display will adjust

again, showing the final drying time.

To use an Auto Cycle

•

Select an Auto Cycle. Auto cycles will default to the last

dryness setting used for that cycle.

•

Select DRYNESS to adjust how dry you want the load.

The time displayed is an estimated length of the cycle

based on the Dryness selected. As the cycle runs, the

control senses the dryness of the load and adjusts the

time automatically for the selected dryness level.

NOTE: Time is not adjustable for Automatic

Cycles. Pressing

the Timing Up or Down buttons will cause a triple beep,

indicating that the time cannot be changed.

To make changes to the Dryness and/or Options during

an Auto Cycle:

•

Press PAUSE/CANCEL once.