- ページ 13

ドライヤー Whirlpool WGD8300SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD8300S 48 ページ。 Dimensions
Whirlpool WGD8300S にも：寸法と設置について (1 ページ), 寸法 (1 ページ)

You can change your door swing from a right-side opening to a

left-side opening, if desired.

1. Place a towel or soft cloth on top of the dryer or work space

to protect the surface.

Remove the door assembly

1. Remove the 4 screws that hold the door hinge on the front

panel of the dryer.

A. Dryer front panel

B. Door assembly

Lay the door assembly on a flat, protected surface with the

inside (inner door assembly) facing up.

Remove the 6 Phillips head screws to release the outer door

assembly from the inner door assembly, as indicated below.

See illustration.

It is important that you remove only the

6 indicated screws.

4. Lift the inner door assembly off the outer door assembly.

5. Disengage locking tabs by rotating inner ring clockwise. See

illustration.

Reverse hinge

1. Use a small flat-blade screwdriver to remove 2 plug strips

from the inner door. Slide the head of the screwdriver under

the plugs, being certain not to scratch the inner door surface.

Lift up.

A. Door hinge

B. Plug strips

C. Hinge cover

Remove the 4 screws that attach to the inner door hinge and

move the hinge to the other side. Reinstall the 4 screws.

A. Door hinge

4. Reinstall plug strips on opposite side of the inner door.

5. Check for fingerprints

on the glass. Clean glass if necessary.

6. Place the inner door assembly inside the outer door

assembly. To fit correctly, the inner door assembly edge fits

completely inside the outer door assembly edge.

A. Inner ring

B. Outer ring

6. Turn inner ring 180 ° and lock tabs into place.