Whirlpool WGD8300S 사용 및 관리 매뉴얼 - 페이지 13

{카테고리_이름} Whirlpool WGD8300S에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool WGD8300S 48 페이지. Dimensions
Whirlpool WGD8300S에 대해서도 마찬가지입니다: 치수 및 설치 정보 (1 페이지), 치수 (1 페이지)

페이지 인쇄

You can change your door swing from a right-side opening to a

left-side opening, if desired.

1. Place a towel or soft cloth on top of the dryer or work space

to protect the surface.

Remove the door assembly

1. Remove the 4 screws that hold the door hinge on the front

panel of the dryer.

A. Dryer front panel

B. Door assembly

Lay the door assembly on a flat, protected surface with the

inside (inner door assembly) facing up.

Remove the 6 Phillips head screws to release the outer door

assembly from the inner door assembly, as indicated below.

See illustration.

It is important that you remove only the

6 indicated screws.

4. Lift the inner door assembly off the outer door assembly.

5. Disengage locking tabs by rotating inner ring clockwise. See

illustration.

Reverse hinge

1. Use a small flat-blade screwdriver to remove 2 plug strips

from the inner door. Slide the head of the screwdriver under

the plugs, being certain not to scratch the inner door surface.

Lift up.

A. Door hinge

B. Plug strips

C. Hinge cover

Remove the 4 screws that attach to the inner door hinge and

move the hinge to the other side. Reinstall the 4 screws.

A. Door hinge

4. Reinstall plug strips on opposite side of the inner door.

5. Check for fingerprints

on the glass. Clean glass if necessary.

6. Place the inner door assembly inside the outer door

assembly. To fit correctly, the inner door assembly edge fits

completely inside the outer door assembly edge.

A. Inner ring

B. Outer ring

6. Turn inner ring 180 ° and lock tabs into place.