- ページ 10
ドライヤー Whirlpool WHD5090GWのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WHD5090GW 35 ページ。 Heat pump dryer
ページを印刷する
4.
Load dryer
Open the door by pulling on the handle. Place laundry
in the dryer. Add a dryer sheet to wet load if desired.
Close the door.
IMPORTANT: Do not tightly pack the dryer. Items need
to tumble freely. Tightly packing can lead to poor drying
performance and may increase wrinkling and tangling.
5.
Touch Power button to turn on dryer
6.
Select program/cycle
Mixed
Heavy Duty
Bulky/Bedding
Normal
Synthetics
Delicates
Turn the knob to select a program/cycle for your laundry load.
As you turn the knob, an indicator light will light up next to
the program/cycle names to the left of the knob. Stop turning
when the indicator next to the desired program/cycle lights up.
Press the knob to confirm your selection.
See "Program/Cycle Guide" for details on program/cycle
features.
10
Wool
Air Dry
Refresh
Timed Dry
7.
Select options, if desired
Cycle
Signal
Hold 3 Sec
8.
Setting a delayed start, if desired
Wool
edding
Air Dry
Delay
Start
Refresh
Timed Dry
If you do not want to begin a cycle immediately, you may
choose the Delay Start option. This will delay the start
of the drying cycle by up to 23 hours.
To set a Delayed Start:
1. Touch the Delay Start button to set the desired delay time.
2. Turn the knob to the number of hours you want to delay
the start of the drying cycle. The delay time will appear
on the display. Press the knob to confirm your selection.
After touching the Start/Pause button, the time will count
down until the delay time has been reached. The dryer will
start and the display will show the remaining time in the cycle.
9.
If Air Dry or Timed Dry was selected,
set drying time
Wool
edding
Air Dry
Timed
Dry
Refresh
Timed Dry
When you select a timed cycle, the indicator light above
"Timed Dry" lights up. Turn the knob to select the desired
time, up to 180 minutes. Press the knob to confirm your
selection.
Control
Steam
Lock
X-Dry
Damp
X-Dry
Damp
Dry
Dry
Dry
Dry