- ページ 12

ドライヤー Whirlpool WHD5090GWのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WHD5090GW 35 ページ。 Heat pump dryer

ページを印刷する

Dryer Care

CLEANING THE DRYER LOCATION

Keep dryer area clear and free from items that would

block the airﬂow for proper dryer operation. This includes

clearing piles of laundry in front of the dryer.

CLEANING THE DRYER INTERIOR

To clean dryer drum:

1. Use a mild hand dish detergent mixed at a low

concentration with very warm water, and rub with

a soft cloth.

2. Rinse well with a wet sponge or towel.

3. Tumble a load of clean clothes or towels to dry drum

Use a microﬁber cloth and hot water in a spray bottle

to clean the drum and a second microﬁber towel to dry.

REMOVING ACCUMULATED LINT

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often,

depending on dryer usage. Cleaning should be done

by a qualiﬁed appliance servicer.

CLEANING THE LINT SCREEN

Clean lint screen after every load.

The lint screen is located in the door opening of the dryer.

A screen blocked by lint can increase drying time.

To clean:

1. Pull the lint screen straight up and out. Press tab down

and open lint screen. Roll lint off the screen with your

ﬁngers.

2. Push the lint screen ﬁrmly back into place.

IMPORTANT:

Do not run the dryer with the lint screen loose,

damaged, blocked, or missing. Doing so can cause

overheating and damage to both the dryer and fabrics.

As-needed cleaning

Laundry detergent and fabric softener residue can build

up on the lint screen. This buildup can cause longer drying

times for your clothes, or cause the dryer to stop before

your load is completely dry.

Clean the lint screen with a nylon brush every 6 months,

or more frequently, if it becomes clogged due to a residue

buildup.

To wash lint screen:

1. Roll lint off the screen with

your ﬁngers.

2. Wet both sides of lint screen

with hot water.

3. Wet a nylon brush with hot water

and liquid detergent. Scrub lint

screen with the brush to remove

residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with

a clean towel. Reinstall screen

in dryer.