- ページ 8

換気フード Whirlpool UXI1200DYSのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool UXI1200DYS 20 ページ。 600 cfm and 1200 cfm in-line blowers for range hoods
Whirlpool UXI1200DYS にも：製品寸法 (1 ページ)

ページを印刷する

Electrical Shock Hazard

Electrically ground blower.

Connect ground wire to green and yellow ground wire

in terminal

box.

Failure to do so can result in death or electrical shock.

8. Connect the green (or green/yellow)

ground wire from the

wiring conduit to the green (or yellow/green)

ground wire (H)

in the terminal box using UL listed wire connectors.

9. Reinstall the in-line blower terminal box cover and screw.

10. Reinstall the front cover of the in-line blower housing and

secure it with 10 mounting screws.

Electrical

Connection

Inside Range Hood Between

In-line

Blower System and Range Hood

1. With the range hood mounted (see the range hood installation

instructions),

locate the wiring cable connector inside the

range hood.

2. Connect the 6-wire connector assembly supplied with the

in-line blower motor system to the mating cable connector

from the range hood.

Locate the terminal box inside the range hood and install a

1/2"(1.3 cm) UL listed or CSA approved strain relief (see the

range hood installation instructions).

4. Run the wire ends from the 6-wire connector assembly

through the 1/2"(1.3 cm) strain relief, leaving enough wire

length to make the wiring connections.

Tighten the strain

relief screws.

5. Connect the wires from the 6-wire connector assembly to the

wires from the wiring conduit inside the range hood terminal

box.

6. Connect the same color wires to each other (black to black,

white to white, etc.) using UL listed wire connectors.

NOTE: Connect the green (or green/yellow) ground wire from

the wiring conduit to the green (or bare) ground wire from the

home power supply using UL listed wire connectors (see the

"Make Electrical Power Supply Connections to Range Hood"

section in the range hood installation instructions).

A. UL listed or CSA approved

½" wiring conduit

B. UL listed wire connectors

C. Black wires

D. White wires

E. Red wires

F. Blue wires

G. Gray wires

H. Green (or green/yellow)

wire

I. 6-wire connector assembly

7. Connect the home power supply wiring to the range hood

following the instructions

that are supplied with the range

hood.

8. Reinstall the range hood terminal box cover.

9. Reconnect power.