- ページ 13

換気フード Whirlpool UXT4236ADのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool UXT4236AD 34 ページ。 30" (76.2 cm) and 36" (91.4 cm) range hood
Whirlpool UXT4236AD にも：取扱説明書 (28 ページ), 取扱説明書 (28 ページ)

ページを印刷する

The range hood is designed to remove smoke, cooking vapors

and odors from the cooktop area. For best results, start the hood

before cooking and allow it to operate several minutes after the

cooking is complete to clear all smoke and odors from the

kitchen.

The hood controls are located on the front panel of the range

hood.

A. Incandescent light housing and cover

B. Grease filter retainer

C. Grease filter

IMPORTANT: Clean the hood and grease filters frequently

according to the following instructions. Replace grease filter

before operating hood.

Exterior Surfaces:

IMPORTANT: Do not use soap-filled scouring pads, abrasive

cleaners, Cooktop Polishing Creme, steel wool, gritty washcloths

or paper towels.

To avoid damage to the stainless steel, do not use cleaners that

contain chlorine.

Cleaning Method:

Rub in direction of grain to avoid scratching or damaging the

surface.

For stainless steal models, Stainless Steel Cleaner and Polish

Part Number 31462A (not included): See "Assistance or

Service" section to order.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

Glass cleaner to remove fingerprints.

RANGE HOOD USE

RANGE HOOD CARE

Range Hood Controls

Operating the light

Turn the light switch to the right 1 position for Low (night light).

Turn the light switch to the right 2 positions for High.

Operating the fan

The fan is variable speed. Rotate the fan switch to the right to

turn the fan to the ON position. Continue to rotate the switch to

the desired fan speed.

To turn the fan OFF, rotate the fan speed switch to the left to the

OFF position.

Cleaning

Metal Grease Filter

For vented installations:

1. Remove screw from the grease filter retainer.

2. Turn the grease filter retainer to release filter.

3. Wash metal filters as needed in dishwasher or hot detergent

solution.

4. Reinstall the filter by placing the back edge in the channel at

rear of hood. Push filter into place, turn the filter retainer to

secure filter to range hood.

5. Replace screw in the grease filter retainer.

A. Fan speed switch

B. On/Off light switch

A. Filter retainer