- ページ 4
サーモスタット Clare Controls CH-THSTAT-WのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Clare Controls CH-THSTAT-W 10 ページ。 Wi-fi thermostat
Clare Controls CH-THSTAT-W にも： 操作マニュアル (15 ページ)
ページを印刷するInstaller Settings screen
Installer Settings Menu items
Display Lock
Y = Display LOCKED
N = Display unlocked
Allows you to lock or unlock the thermostat buttons.
When the buttons are locked, you can still access the main menu, but you will not be
allowed to select any menu options.
The Installer Settings hidden button operation is always operational, allowing you to return
to this screen and turn Display Lock off.
Service Mode
Test Mode
Y= Test mode on. Reduces all delays to 10 sec for quicker system testing
N= Test mode off. Normal system delays
CAUTION: in test mode all system safety delays are shorten. Disconnect Y1 or Y2
compressor outputs if using test mode on a live system.
Network Settings Submenu: Shows WiFi settings. Same as in the Main Menu selection.
See Operations Manual
System Settings Submenu: Sets the HVAC operational settings below
Mechanical Settings Submenu: Sets HVAC system type and configuration. Same as
SETUP menu.
Type
Selects HVAC type, Gas/Electric or Heat pump
Fan Type
Selects the Fan type if system is Gas or Electric
C/O Type
Selects the Heat Pump Changeover Valve type
nd
2
Stage Heat
Enables the 2
Aux Heat (HP)
Enables the Auxiliary Heat operation.
Typically the Aux Heat will be heat-strips in a Heat Pump system
nd
2
Stage Cool
Enables the 2
DCN: 2012-11-222-1
Range: Y or N
Range: Y or N
Range: Gas/Elec or Heat pump
Range: Gas or Elec
Range: w/Cool or w/Heat
Range: Y or N
nd
Stage Heat operation
Range: Y or N
Range: Y or N
nd
Stage Cool operation
Installer Settings
Display Lock
Service Mode
Network Settings
System Settings
Select
Done
Default: N
Default: N
Default: Gas/Elec
Default: Gas
Default: w/Cool
Default: N
Default: Y
Default: N
Page 4