- ページ 10

楽器アンプ AER 9000-0043-8911のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AER 9000-0043-8911 16 ページ。

5.6 Insert

The insert-loop is an in-/output on a stereo-socket to

link different effect-devices (EQ, compressor etc.) in serial

mode with tip = send (input) and ring = return (output).

This configuration allows several more applications,

such as:

1. use as additional line-output

2. use as additional line-input

3. link between two or more AER-amps with insert-

feature (AG8, Domino, Compact ClassicPro)

For each of these applications you'll need the appropriate

cable connection, e.g. use as line-output: stereo-jack

(tip and ring = hot, sleeve = ground) to mono-jack.

The particular AER-link-application (s. no. 3 - link bet-

ween AER-amps) is represented on page 11. In link-ope-

ration it is assured, that the signals of all connected amps

are hearable on all devices, even with different effect

settings. You just have to be aware, that the different

levels depend on each other.

This setting (in combination with active loudspeakers,

pre master-function) works as a complete and easily

operated reinforcement/monitor system.