- ページ 3

試験装置 Alcovisor JupiterのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alcovisor Jupiter 8 ページ。
Alcovisor Jupiter にも：取扱説明書 (12 ページ), 取扱説明書 (12 ページ)

Select the icon for Advanced Settings and input the password 112112.

1. Blow: This icon under advanced settings allows the user to change

the blow time (in seconds), initiate flow rate (in L/M) and minimum

volume (in L). These are already set for optimal performance; it is not

recommended that they be changed. Default settings are 8L, 3 s and

1.2L.

2. Default: Select yes under this icon to return instrument to Default

settings. NOTE: Settings have been optimized and it is not

recommended to return to Default settings.

3. Unit: Set the measurement unit and BAC/BrAC ratio. If unit is

changed, the instrument does not need to be recalibrated.

4. Password: The default passwords for advanced settings and

calibration can be changed. Select "Cal" or "Advanced Setting" to

change the password. Enter the new password and select

confirm. Screen will display "Password Setting Succeed".

NOTE: Instrument requires a 6-digit password. If less than six

digits are used, password will not store properly.

Warning: If you change the password, write it down. The new

password must be sent in with your unit if it should need

service.

You can also choose whether to save Passive Screening Test Results by checking the box,

the default is Not Saved.

5. Delete: This option allows for the deletion of ALL saved test records

stored in the Jupiter. Once you select "Delete All Records", they

cannot be restored.

6. Field:

i. Nine different fields can be set.

Advanced Settings: