- ページ 20

プリンター Xerox DocuColor 5750のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuColor 5750 40 ページ。 Digital color printer / copier
Xerox DocuColor 5750 にも：リファレンス・マニュアル (8 ページ), リファレンス・マニュアル (7 ページ), リファレンス・マニュアル (7 ページ), リファレンス・マニュアル (9 ページ), 補足マニュアル (8 ページ), スタートマニュアル (46 ページ), 補足マニュアル (10 ページ), マニュアル (9 ページ)

Status

Code

07-281,

The control logic sensed a timing error for the Lift Up Time of Tray 1(07-281), Tray 2 (07-282), Tray 3 (07-283) or Tray

282, 283,

4 (07-284).

284

Initial action:

Switch off the machine power.

Power the machine on.

If the problem still exists:

Place a service call.

Tray Load

The control logic has sensed that no paper is being detected in one of the paper trays.

Paper for

Initial action:

Tray 1, Tray

Go to the Paper Tray which was selected on the Control Panel and verify that the Paper Size Indicator is set

2, Tray 3,

to the correct paper size that is loaded in the Paper Tray.

Tray 4, or

the Bypass

Go to the Paper Tray which was selected on the Control Panel and verify that the paper is loaded correctly.

Tray

For the appropriate tray, clean the Tray Feed, Retard, Nudger, Preregistration and Registration Rolls with a

damp cloth (water). (REP 5.22) (REP 5.24)

NOTE : Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These

items may cause a sensor failure to be displayed as an operator error message.

If the problem still exists:

Place a service call.

Fault Code Procedures

Description/Direction

5/98

2-20

5750 DocuCare Service Manual