- ページ 7

コピー機 Xerox ColorQube 9203のPDF 安全な設置と操作をオンラインで閲覧またはダウンロードできます。Xerox ColorQube 9203 12 ページ。 Mfp
Xerox ColorQube 9203 にも：インストールと操作方法 (14 ページ), 評価者マニュアル (28 ページ), クイック・ユーザー・マニュアル (38 ページ), クイックマニュアル (8 ページ), クイックマニュアル (16 ページ), クイックマニュアル (33 ページ), 安全な設置と操作 (12 ページ), コピーの作り方 (9 ページ)

ページを印刷する

12. If IPv6 is disabled and then a software upgrade is performed by a Xerox Service Technician using an AltBoot, IPv6 will be

disabled even though the both the Local UI and Web UI show that IPv6 is enabled. IPv6 can be enabled again by first disabling

it on the Web UI and then re-enabling it on the Web UI.

13. Xerox strongly recommends that users place documents scanned on a ColorQube™ 9201/9202/9203 using the Scan to Mailbox

feature in private folders and not in public folders.

14. The following windows are available from the Local User Interface to a ColorQube™ 9201/9202/9203 with System

Administrator login and authentication. These windows provide standard system configuration or job management capability:

•

PagePack Passcode - Allows the System Administrator to enter a 4 digit "PagePack PIN" to enable a PagePack device to

work with metered supplies. Is accessible by selecting the following screens/buttons in order: [Machine Status] hard button

[Tools] button

accesses the PagePack Passcode screen and enters a valid PagePack PIN, the System Administrator can print out PagePack

courtesy prints by selecting the [Skip] button; however, if the number of PagePack courtesy prints requested exceeds the

allowable limit an appropriate error message will be displayed on the screen and the System Administrator will have to re-

enter a valid PagePack PIN.

•

Enter Cleaning Unit Passcode - Allows the System Administrator to enter a 4 digit passcode to temporarily extend a

Customer Replaceable Unit (CRU) when that CRU has reached its end of life. Is accessible by selecting the following

screens/buttons in order: [Machine Status] hard button

Unit Passcode] button.

•

Low Supply Warning - Allows the System Administrator to set when to receive low supply warnings for the ColorQube Ink

Sticks, Cleaning Unit, and Document Feed Roll. Is accessible by selecting the following screens/buttons in order: [Machine

Status] hard button

button.

•

Service Plan - Allows the System Administrator to set or change the Service Plan for the device. Is accessible by selecting the

following screens/buttons in order: [Machine Status] hard button

Plan] button.

•

Network Logs – Allows the System Administrator to download network logs to a USB drive for troubleshooting purposes. Is

accessible by selecting the following screens/buttons in order: [Machine Status] hard button

Settings] button

a basic or an enhanced level of network log information, and a separate screen will provide information on the completion

status of the download.

•

USB Settings – Allows the System Administrator to enable/disable and set the configuration of the USB Printer Port

connectivity. Is accessible by selecting the following screens/buttons in order: [Machine Status] hard button

button

[Network Settings] button

•

Supply Counter Reset – Allows the System Administrator to manually reset the supply counter for a CRU on a ColorQube™

9201/9202/9203 back to 100% when that CRU is replaced. Is accessible by selecting the following screens/buttons in order:

[Machine Status] hard button

Reset] button.

15. The following windows are available to any authenticated and authorized user from the Local User Interface to a ColorQube™

9201/9202/9203. These windows provide standard machine services or job management capability:

•

Embedded Fax Batch Send Confirmation – Allows a user to either send an Embedded Fax job to a remote destination

immediately or include the job as part of a "batch" of Embedded Fax jobs sent to the same destination. Is accessible by

selecting the following screens/buttons in order: [Services Home] hard button

button when a user is submitting an Embedded Fax Send job to the same destination as a previously submitted "delayed

send" Embedded Fax job.

•

Workflow Scanning Authentication Required – Allows a user to enter the proper user credentials for a workflow scanning

job being sent to a network destination that requires user login. Is accessible by selecting the following screens/buttons in

order: [Services Home] hard button

workflow scanning job to a network destination that requires user login

•

Pausing an active job being processed by the device – Allows the user to pause an active copy, print, workflow scanning,

scan to email, Internet Fax or Embedded Fax job while it is being processed by the ColorQube™ 9201/9202/9203. Is

accessible by selecting the [Stop] machine hard button while a job is being processed by the device. Depending on the type

of jobs being processed by the device when the [Stop] button is selected, one of the following Pause windows will be

displayed as appropriate to allow the user to determine whether to delete or continue processing of the job: Scanning

Pause window, Printing Pause window, Copy Only (Scanning and Printing) Pause window, Scanning/Printing

[Device Settings] button

[Tools] button

[User Interface Settings] button

[Advanced Settings] button

[Tools] button

[Workflow Scanning] button

[Enter PagePack Passcode] button. Once the System Administrator

[Tools] button

[Network Logs] button. The System Administrator can download either

[USB Settings] button.

[Troubleshooting] button

[Start] hard button when a user is submitting a

[OK] button.

[Device Settings] button

[General] button

[Low Supply Warning]

[Service Settings] button

[Tools] button

[Resets] button

[Fax] feature button

[Enter Cleaning

[Service

[Network

[Tools]

[Supply Counter

[Start] hard