- ページ 10

アンテナ ALDEN SkymaticのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALDEN Skymatic 17 ページ。 Coast to coast automatic satellite system with ssc skew unit

Advice on how to install a receiver & cable connection

The following instructions are given as general advice: you MUST follow the instructions delivered with the

receiver that will be installed.

1. Place the receiver in a ventilated and accessible area.

2. Connect the receiver to the S.S.C.® unit (Out to demo).

Warning: Do not use the existing coax circuit. The quality of the picture could be altered. Each connection

between the satellite system and the S.S.C.® or between the S.S.C.® and the receiver can cause the signal to

weaken. Different types of cables can also cause interference.

3. Connect the television to the receiver.

4. Connect the receiver to the power supply. The + line must be protected with an adapted fuse (see the

instructions delivered with your receiver). We also advice to put a swith on the + line.

5. In the Setup menu of your receiver, make sure the local oscillator (LO) is at 10.7 GHz.

Warning:

• In any case, a direct line (no links) with an adapted fuse must go from the receiver to the battery for the

+ line.

• Always use the provided cables.

• The warranty will become void if these instructions are not followed.

Coax cable

Motor cable

This supply must be able to deliver 1,5 A minimum

RECEIVER / DECODER

VCR / DECODER

More information https://www.caravansplus.com.au

Skew cable

+ after ignition

Battery 12 V

12... 18V in

+12V DC

ALD-06602