- ページ 11

アンテナ ALDEN SkymaticのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALDEN Skymatic 17 ページ。 Coast to coast automatic satellite system with ssc skew unit

ALDEN Skymatic ユーザーマニュアル

SSC connection layout

1
2
N° : description
1 : IR
2 : LNB in
3 : Out to demo
4 : Data
5 : Motor
6 : Skew
7 : Contact
8 : 10-15V DC
Reminder:
• The system must be in a vertical position in a well ventilated space.
• Do not place the unit near a source of heat or humidity.
• The ventilation must be free. Do not block.
• Do not use existing coax circuits. The quality of the picture can be affected.
• Each link will weaken the signal.
• Cables of a different type can also change the quality of the picture.
• In any case, even when initial cables have been put in:
- a direct line (no links) with a 5Amp fuse must go from the unit to the battery for the + wire.
- a direct line (no links) must go from the unit to the battery for the - wire.
- a direct line (no links) with a 5Amp fuse must go from the unit to the "+ after ignition" located
on the ignition key or on the main unit.
• Never use the "+ after ignition" on the fridge, the steps or the battery separator.
• You must always use the provided cables.
• The warranty will become void if these instructions are not followed.
ALD-06602
3
4
Type of connection
Jack 3.5mm connector
Coaxial type F
Coaxial type F
RJ-45
Power
Power
Terminal connection
Jack 3.5mm connector
More information https://www.caravansplus.com.au
5
6
Description of inputs / outputs
Not used.
Connection with the LNB from the satellite system.
Connection used between the unit and the
receiver.
Used to transfer the updating data.
Used for the motorization of the satellite system.
Used for the motorization of the LNB.
Safety device: will fold the satellite system down
and is connected to the vehicle ignition.
Main power supply.
7
8
11