- ページ 33
プリンターアクセサリー Xerox Phaser 750DPのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Xerox Phaser 750DP 40 ページ。 Digital color printer / copier
Xerox Phaser 750DP にも： 仕様 (2 ページ), パンフレット＆スペック (4 ページ), リファレンス・マニュアル (8 ページ), マニュアル (9 ページ)
ページを印刷する
Status
Code
10-370
The control logic sensed that the Pressure Roll did not reach operating temperature.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-371
The control logic sensed that the Pressure Roll Heat Rod did not turn off after the Pressure Roll reached operating
temperature.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-372
The control logic sensed that the Pressure Roll did not return to operating temperature after a job run.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-33
Fault Code Procedures