Xerox Phaser 750DP Instrukcja serwisowa - Strona 33

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Akcesoria do drukarek Xerox Phaser 750DP. Xerox Phaser 750DP 40 stron. Digital color printer / copier
Również dla Xerox Phaser 750DP: Specyfikacje (2 strony), Broszura i specyfikacje (4 strony), Podręcznik referencyjny (8 strony), Podręcznik (9 strony)

Drukuj stronę
Xerox Phaser 750DP Instrukcja serwisowa
Status
Code
10-370
The control logic sensed that the Pressure Roll did not reach operating temperature.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-371
The control logic sensed that the Pressure Roll Heat Rod did not turn off after the Pressure Roll reached operating
temperature.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-372
The control logic sensed that the Pressure Roll did not return to operating temperature after a job run.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-33
Fault Code Procedures