- ページ 30

スキャナー Xerox DocuMate 152iのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuMate 152i 41 ページ。 Mac users

Xerox

DocuMate

152i

12. Close the scanner when you're finished.

Troubleshooting

Problem: The scanner won't scan. What's wrong?

Check for one of these possible causes:

•

Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure

the cables are plugged in securely.

•

Is the scanner's status light on? Turn on the scanner's power. If the status light doesn't

come on, plug the power supply into another electrical outlet. If you are using a UPS battery

back-up or power strip, try plugging the scanner directly to a wall outlet.

Did you restart the computer and scanner? If the scanner gets a paper jam, or looses

•

connection because of an error, try restarting your computer and power cycling the scanner.

Did you plug the scanner into a USB hub? If you're using a USB hub to connect the scanner

•

try plugging the scanner's USB cable directly to the back of the computer. It is not

recommended that you use the scanner with a USB hub, if you are using a hub, the hub must

have its own power supply.

•

Is the USB cable 6' or less? If you are using a USB cable that is longer than 6' you may lose

connection to the scanner. The recommended USB cable length is 6' or less, the USB cable

provided with your scanner is within this range.

•

Did you select another image source in the scanning software? If you use multiple

imaging devices with your computer, such as a camera, all-in-one printer, or another scanner,

you may have selected another source for images. Make sure Xerox

selected as the scanner.

Problem: My computer keeps giving me out of hard drive space error messages.

The minimum requirement of free hard drive space is for the installation of the driver and basic,

low resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in size.

Free up some space on your hard drive for the software to be able to save the scanned images.

Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines.

The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages

must be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight.

Maintenance

DocuMate

152i is

User Guide