Xerox DocuMate 152i Podręcznik użytkownika - Strona 30
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skaner Xerox DocuMate 152i. Xerox DocuMate 152i 41 stron. Mac users
Drukuj stronę
®
®
Xerox
DocuMate
152i
12. Close the scanner when you're finished.
Troubleshooting
Problem: The scanner won't scan. What's wrong?
Check for one of these possible causes:
•
Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure
the cables are plugged in securely.
•
Is the scanner's status light on? Turn on the scanner's power. If the status light doesn't
come on, plug the power supply into another electrical outlet. If you are using a UPS battery
back-up or power strip, try plugging the scanner directly to a wall outlet.
Did you restart the computer and scanner? If the scanner gets a paper jam, or looses
•
connection because of an error, try restarting your computer and power cycling the scanner.
Did you plug the scanner into a USB hub? If you're using a USB hub to connect the scanner
•
try plugging the scanner's USB cable directly to the back of the computer. It is not
recommended that you use the scanner with a USB hub, if you are using a hub, the hub must
have its own power supply.
•
Is the USB cable 6' or less? If you are using a USB cable that is longer than 6' you may lose
connection to the scanner. The recommended USB cable length is 6' or less, the USB cable
provided with your scanner is within this range.
•
Did you select another image source in the scanning software? If you use multiple
imaging devices with your computer, such as a camera, all-in-one printer, or another scanner,
you may have selected another source for images. Make sure Xerox
selected as the scanner.
Problem: My computer keeps giving me out of hard drive space error messages.
The minimum requirement of free hard drive space is for the installation of the driver and basic,
low resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in size.
Free up some space on your hard drive for the software to be able to save the scanned images.
Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines.
The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages
must be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight.
22
Maintenance
®
®
DocuMate
152i is
User Guide