- ページ 25

ソフトウェア Xerox DocuPrint 115のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuPrint 115 48 ページ。 Tape client job submission guide enterprise printing system
Xerox DocuPrint 115 にも：操作マニュアル (38 ページ), 仕様 (2 ページ), 操作マニュアル (34 ページ), リファレンス・マニュアル (2 ページ), プランニング・マニュアル (20 ページ), クイック・リファレンス (2 ページ)

Tape Client Job Submission Guide

Managing and printing jobs from

the Tape Client

This chapter describes the procedures for setting up an offline

LCDS job and submitting it from the Tape Client for printing on

the DocuPrint 2000 Series EPS.

This section contains an overview of the steps to set up and print

an LCDS job from the Tape Client. For further details about each

step, refer to the section that is specified following the step.

1. Make sure that all the resources that the job requires (forms,

fonts, and JDLs) are loaded on the printer in the "lcds"

resources folder.

2. If any resources are missing, import them to the controller

disk from the media on which they reside. (Refer to

"Importing resource files," later in this chapter, for the

procedure.)

3. Load the job tape on your tape drive. Make sure that the tape

is at BOT (beginning of tape). (For instructions on loading

tapes, refer to the Xerox DocuPrint 2000 Series 100/115/135/

155/180 EPS Operator Guide for information on the Xerox

DocuPrint EPS cartridge tape drive, or refer to your tape drive

user documentation.)

4. Open the Tape Client window. (Refer to "Accessing the Tape

Client," in the "Managing the Tape Client" chapter.)

2-1