- ページ 10

ソフトウェア Xerox iGen3のPDF プランニング・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox iGen3 38 ページ。 Solutions planning guide
Xerox iGen3 にも: パンフレット (8 ページ)

C.P. Bourg Document Finisher (BDFx)

Install Planning

Device Configurations

Space Requirements

This Install Planning guide will help you prepare for the installation
of the C.P Bourg Document Finisher (BDFx) together with:
Xerox DocuTech 61xx
Xerox DocuTech 1xx HighLight Color (HLC)
Xerox DocuPrint 1xx
Xerox iGen3 Digital Production Press
Xerox Nuvera 100 / 120 Digital Production System
The Bourg Document Finisher components are:
BDFx with Conveyor and 2 Cassette Stitch Heads
Bourg Cover Feeder X (BCFx), optional (not available with
iGen3)
Square Edge Module (SQEDG), optional
Bourg Sheet Rotator (BSR), optional (mandatory with iGen3)
Hohner or Cassette Stitch Heads (2 –4 heads total), optional
Note: The BDFx is delivered with 2 stitch heads. A third and / or
forth stitch head must be ordered and installed with the machine.
The space requirements illustration provides machine footprint as
well as the overall operating and maintenance area.
In addition to the diagram below, there should be a minimum of 82
inches (2.083 mm) clearance from the floor to the nearest overhead
obstruction.
1-2