Xerox iGen3 계획 매뉴얼 - 페이지 10
{카테고리_이름} Xerox iGen3에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox iGen3 38 페이지. Solutions planning guide
Xerox iGen3에 대해서도 마찬가지입니다: 브로셔 (8 페이지)
페이지 인쇄C.P. Bourg Document Finisher (BDFx)
Install Planning
Device Configurations
Space Requirements
This Install Planning guide will help you prepare for the installation
of the C.P Bourg Document Finisher (BDFx) together with:
•
Xerox DocuTech 61xx
•
Xerox DocuTech 1xx HighLight Color (HLC)
•
Xerox DocuPrint 1xx
•
Xerox iGen3 Digital Production Press
•
Xerox Nuvera 100 / 120 Digital Production System
The Bourg Document Finisher components are:
•
BDFx with Conveyor and 2 Cassette Stitch Heads
•
Bourg Cover Feeder X (BCFx), optional (not available with
iGen3)
•
Square Edge Module (SQEDG), optional
•
Bourg Sheet Rotator (BSR), optional (mandatory with iGen3)
•
Hohner or Cassette Stitch Heads (2 –4 heads total), optional
Note: The BDFx is delivered with 2 stitch heads. A third and / or
forth stitch head must be ordered and installed with the machine.
The space requirements illustration provides machine footprint as
well as the overall operating and maintenance area.
In addition to the diagram below, there should be a minimum of 82
inches (2.083 mm) clearance from the floor to the nearest overhead
obstruction.
1-2