- ページ 41

ソフトウェア Xerox Synergix 8825のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Xerox Synergix 8825 48 ページ。 Windows nt 4.0 postscript print driver user guide
Xerox Synergix 8825 にも：セットアップマニュアル (20 ページ), リリースノート (23 ページ), 補足マニュアル (26 ページ), ソフトウェアマニュアル (30 ページ)

CARE

Required Tasks

Perform the following tasks, as required:

Toner identified for use in the XES Synergix 8825/8830 Printer is a

two-component material made specifically for this printer. Use of

Toner that is not indicated for the XES Synergix 8825/8830 Printer

will cause damage to the printer.

Replace the Toner Waste Bottle each time a new Toner Cartridge is installed.

Refer to Replacing the Toner Cartridge in this section of the operator manual.

Do not reuse the contents of the Toner Waste Bottle. Reuse of this

material will cause damage to the printer.

Empty the water periodically from the collection bottle located inside the Front

Door of the printer.

Clean the outside surfaces of the printer, using a cleaning cloth dampened with

mild soap and water. Do not pour or spray liquid directly on to any part of the

printer.

CAUTION

When a Status Code appears on the Message Display and the problem

that caused it is not cleared by following the instructions shown on the

Message Display, call for service after first taking the following steps:

1. Write down the Status Code and any message on the Message

Display, note any flashing LED indicators, and a brief description of

the problem.

2. The Serial Number (A) can be found inside the front cover of this

manual, or open the Front Door of the printer and refer to the

illustration above to locate and write down the serial number.

3. If print quality is the problem, take a print sample to the phone with

you in order to help in describing the problem.

4. Refer to the inside of the front cover of this manual for the local

number to call for service.

XES Synergix 8825/8830 Printer Operator Manual