Xerox Synergix 8825 Operator's Manual - Page 41
Browse online or download pdf Operator's Manual for Software Xerox Synergix 8825. Xerox Synergix 8825 48 pages. Windows nt 4.0 postscript print driver user guide
Also for Xerox Synergix 8825: Setup Manual (20 pages), Release Note (23 pages), Supplementary Manual (26 pages), Software Manual (30 pages)
CARE
Required Tasks
Perform the following tasks, as required:
Toner identified for use in the XES Synergix 8825/8830 Printer is a
two-component material made specifically for this printer. Use of
Toner that is not indicated for the XES Synergix 8825/8830 Printer
will cause damage to the printer.
Replace the Toner Waste Bottle each time a new Toner Cartridge is installed.
Refer to Replacing the Toner Cartridge in this section of the operator manual.
Do not reuse the contents of the Toner Waste Bottle. Reuse of this
material will cause damage to the printer.
Empty the water periodically from the collection bottle located inside the Front
Door of the printer.
Clean the outside surfaces of the printer, using a cleaning cloth dampened with
mild soap and water. Do not pour or spray liquid directly on to any part of the
printer.
CAUTION
CAUTION
Calling for Service
When a Status Code appears on the Message Display and the problem
that caused it is not cleared by following the instructions shown on the
Message Display, call for service after first taking the following steps:
1. Write down the Status Code and any message on the Message
Display, note any flashing LED indicators, and a brief description of
the problem.
2. The Serial Number (A) can be found inside the front cover of this
manual, or open the Front Door of the printer and refer to the
illustration above to locate and write down the serial number.
3. If print quality is the problem, take a print sample to the phone with
you in order to help in describing the problem.
4. Refer to the inside of the front cover of this manual for the local
number to call for service.
XES Synergix 8825/8830 Printer Operator Manual
A
37